1. Del Sol Hot Tub Owners Manual Online
2. Del Sol Hot Tub Owners Manual Pdf
3. Del Sol Hot Tub Owners Manual Free

Locating the Spa Serial Number: The spa serial number label is located on control box cover inside the equipment compartment. Equipment compartment access panel is below the spas 4-button topside control panel. You will need the spa model and serial number to properly register your spa. Recommended Service for Your 1997 Honda Del Sol Recommendations for regular servicing tasks for your vehicle can be found in Service & Maintenance. Warranty Booklets Coverage and terms of your vehicle's warranties, including general provisions, new vehicle limited warranty, emissions, tires and accessories warranties, replacement parts and more. 'Before we purchased our Optima spa we traveled to different spa dealers and wet tested other spas. The Sundance Optima was our choice. My husband is 6'5' and I am 5'3' so we needed something for all sizes. We wanted the spa to be easy to get in and out of and easy to operate.' -Cyndy, Northern Alabama. Get OEM 6600-641 replacement control panels for Del Sol Hot Tubs here. 2001-2005 Del Sol Series Topside Control Part # 6600-641 Used on Redondo and Hermosa models built 2003+ Compatible with he following circuit boards: 6600-289 6600-722 Free Shipping On Orders Over $90!

.Hello there guys and sorry for this being my first post but i need some help before the misses goes even madder at not being able to use the hot tub We acquired a friends Del Sol Redondo hot tub about 3/4 years when they moved off to Spain. It has been working great up until last year when the control panel no longer functioned properly (some times it would start, not getting the temp up correctly, bubbles not coming on properly). After a lot of looking around for the part (very hard to find about this tub in the UK), we managed to get the part and I installed it last month with no probs.

Started it up with out the filter in and all was good. Let it run for a bit and temp was going up nicely and all looked good. Put the filter back into it and placed the cover back over to get nice and warm. Cam back a little later and was getting up to temp nicely.A little later, found out that it had stopped pumping and a FLO error had come up. Turned it all off and made sure the filter was in correct, which it was.

Nothing had gotten into the pipes to stop the flow either. Turned it all back on only to find 3 dashes on the display now and it will not start pumping. Ive made sure there is not an airlock in the pipes but apart from that im at a loss.I can not find any manuals online for it to help me out. Was wondering if it needs a re set some how but i do not know how to do that eben. Home Hot Tubs Owners ManualSol y la lluvia del Amazonas, El Q28905 Solar System (Simply Science), The Q34747 Solar System, The To The Tub Q14492 Toad Q11614 Toad Eats Out Q16477 Toad Is The Uncle Of Heaven Q24869 Stan The Hot Dog Man Q27532 Stan's Stunt (Anthology) Q26367 Stand Tall, Molly Lou Melon Q10854 Return Doc. Del Sol Hot Tub ManualAny advice or help would be wonderful.

Thx a lot guys Joe. 850 Series 850 Series Installation & Owner’s Manual Installation & Owner’s Manual.Attention New Hot Tub Owner! Congratulations on the purchase of your new Sundance Hot Tub!The following is a list of automated functions performed by your hot tub. These functions are listed below in an attempt to suppress any operational concerns you may have during the first 24-hours of owner- ship! Also listed below are important maintenance recommendations you should observe on a regular basis to protect your new investment. ADDENDUM The 2004 Cameo massage selector and air control operation has changed since its introduction! Cameo models manufactured between 11/24/03 to 1/15/04 operate as illustrated below (Left).

Models manufactured after 1/16/04 operate as illustrated below (Right).R evis ed Operation. 7.0 Start-Up Instructions.13 8.0 Operating Instructions.15 8.1 View.15 8.2 Light.15 8.3 Jet/Air Controls Diagram (Optima & Cameo Models).18 8.4 Jet/Air Controls Diagram (Altamar & Marin Models).19 8.5 Jet/Air Controls Diagram (Capri Models).20 8.6 Air Injection.21 8.7 Jets 1.21. 1 1.0 Hot Tub Maintenance.35 1 1.1 Cleaning The Filter.35 1 1.2 Draining and Refilling.37 1 1.3 Mini Intelli-Jet Cleaning Procedure.38 1 1.4 Cleaning The Hot Tub Interior.39 1 1.5 Pillow Care.39 1 1.6 Maintaining The Wood Cabinet.39 1 1.7 Maintaining The Optional Synthetic Cabinet.40 1 1.8 Maintaining The Cover.40 1 1.9 Winterizing.40. Read and carefully follow the requirements for your hot tub’s support base found in section 3.0 titled, “Locating Your Sundance Hot Tub” (page 8). Sundance Spas constantly strives to offer the finest hot tubs available, therefore modifications and enhancements may be made which affect the specifications, illustrations and/or instructions contained herein. 2.0 IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY When installing and using this electrical equipment, basic safety precautions should always be followed, including: 1) WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.8) WARNING: To Reduce the Risk of Injury: a) The water in a hot tub should never exceed 104 °F (40 °C).

Water tem- peratures between 100 °F (38 °C) and 104 °F (40 °C) are considered safe for a healthy adult. Lower water temperatures are recommended for young children and when hot tub use exceeds 10 minutes. C) At least two lugs marked “Bonding Lugs” are provided on the external surface or on the inside of the supply terminal box/compartment. To reduce the risk of electric shock, connect the local common bonding grid in the area of the hot tub to these terminals with an insulated or bare copper conductor not smaller than No.

WARNING: Pregnant or possibly pregnant women should consult a physi- cian before using a hot tub.AVERTISSEMENT: LES FEMMES ENCEINTES, QUE LEUR GROSSESSE SOIT CONFIRMEE OU NON, DEVRAIENT CONSULTER UN MEDECIN AVANT D’UTILISER LA CUVE DE RELAXATION. WARNING: Water temperature in excess of 38 °C (104 °F) may be injuri- ous to your health.

Older Sundance Spa Models

ATTENTION: LA TENEUR DE L’EAU EN MATIERES DISSOUTES DOIT ETRE CONFORME AUX DIRECTIVES DU FABRICANT. WARNING: The use of alcohol or drugs can greatly increase the risk of fatal hyperthermia in hot tubs.AVERTISSEMENT: LA CONSOMMATION D’ALCOOL OU DE DROGUE AUG- MENTE CONSIDERABLEMENT LES RISQUES D’HYPERTHERMIE MORTELLE DANS UNE CUVE DE RELAXATION. CAUTIONS Persons suffering from heart disease, diabetes, high or low blood pres- sure, and any condition requiring medical treatment, pregnant women, the elderly, or infants should consult with a physician before using a hot tub. The Consumer Products Safety Commission has stated that the water temperature in a hot tub should not exceed 104 °F (40 °C). 3.0 Locating Your Sundance Hot Tub IMPORTANT: Because of the combined weight of the hot tub, water and users, it is extremely important that the base upon which the hot tub rests be smooth, flat, level and capable of uniformly supporting this weight, without shifting or settling, for the entire time the hot tub is in place.

4.0 General Electrical Safety Instructions Your new Sundance hot tub is equipped with the 'state-of-the-art' Sentry equipment system.It contains the most advanced safety and self-protective equipment in the industry. Nonetheless, this hot tub must be installed prop- erly to insure dependable usage. Please contact your dealer or local building department should you have any questions regarding your installation. Figure-A Equipment Area SPA CONROLLER Note: Pump Locations Vary by Model Sentry Control Box Pump Drain Plug(s) Power Supply Entrance(s) High Speed Pump #2 (N/A Capri) 2-Speed Pump #1 Circulation Pump Heater 10. Optional Audio System Subwoofer - 5a.Hot Tub Drain (External Drain Type) Behind Bulkhead (Models with 5b.

Del Sol Hot Tub Owners Manual Online

5.0 Electrical Installation Instructions (240V Service) IMPORTANT NOTICE: The electrical wiring of this hot tub must meet the requirements of the National Electrical Code (NEC) and any applicable state or local codes.The electrical circuit must be installed by a qualified electri- cian and approved by a local building/electrical inspection authority. If you prefer, your Sundance dealer can perform a minor circuit board modi- fication to allow the hot tub to accept different electrical service. The opera- tional considerations of these modifications are listed in the footnotes below. CAMEO, OPTIMA, MARIN and ALTAMAR Models 240V/30A 240V/50A. Note: Not applicable for 1-pump Capri models.7.0 Start-Up Instructions CAMEO, OPTIMA, ALTAMAR, MARIN AND CAPRI) FOR BEST RESULTS, READ EACH STEP IN ITS ENTIRETY BEFORE PROCEEDING WITH THAT STEP. Prepare Hot Tub for Filling.

Remove hose and replace filter cartridge as illustrated in section 1 1.1, page 36 (Step-G). Turn On Power Turn on power to hot tub at the home’s circuit breaker.

The heater and circulation pump will automatically activate. If the control panel LCD flashes water temperature and “COOL”.Place Cover On Hot Tub. Keeping the insulating cover in place anytime the hot tub is not in use will reduce the time required for heating, thereby minimizing operating costs. The time required for initial heat-up will vary depending on the starting water temperature and the capacity of your hot tub. Indicates high-speed pump #2 is Indicates hot tub light Indicates air injector system is on. Indicates 2-speed pump #1 on (Cameo, Optima, Altamar, And is on (changes accord- is on (changes according Marin only).

Ing to brightness to speed selected, flashes selected).Capri (See Page 18-20 for 15. Optional Audio System Speakers Operation Details) (2 places) 8. Auxiliary Control Panel (Cameo, 16. Optional Audio System Receiver Optima and Altamar Only) 1 7. Cool Down Seat (Location of features varies by model). 8.3 Jet/Air Controls Diagram (Optima & Cameo Models) Page 18.

8.4 Jet/Air Controls Diagram (Altamar & Marin Models) Page 19.8.5 Jet/Air Controls Diagram (Capri Models) Page 20. Note: the footwell suction filters in your hot tub (page 17) protect the diverter valve from debris entrapment/damage.In the Optima, Cameo and Marin, one massage selector controls the therapy jets and whirlpool jets. The other massage selector controls the therapy seat jets and vertical jets (foot jets).In the Altamar, the massage selector on the high-speed pump #2 system diverts between the therapy seat and the whirlpool jets (in the footwell and on the side wall). The 2-speed pump #1 system powers the therapy jets in the lounge and seats of the hot tub. Made fragrance available from your Sundance dealer. The fragrance is carried into the hot tub water by the air coming through the injector system when the air blower is on. WARNING To prevent personal injury, always turn off air blower before removing or installing SunScents dispenser cap.Optional SunSound Stereo Receiver Features M A R I N E MRD 60 SOURCE LOCAL DISC IN TRACK SCAN POWER TUNE INTRO RANDOM REPEAT DISK BAND MUTE AUDIO AUTO 17 16 15 14 13 Volume Up/Down (VOL) 1 1.

Scan Mute 12. Adjusting Bass Level Press audio button (20) until display reads “BAS.” Rotate volume knob to desired setting. A display of “C O” indicates center, -2 to -12 indicates bass cut, and +2 to +12 indicates bass boost.

Note: unit returns to vol- ume mode if volume control is not rotated for 3 seconds.Open/Close Front Panel Place thumb on front panel release button (7) with forefinger below front overhang. Press firmly on release button, then flip panel open by pulling out- ward at top edge. To close panel, flip panel up and press firmly until you hear an audible click.

Scan Functions Select any AM or FM band and press scan button (1 1) to listen to a few seconds of each radio station. The display will flash and the radio will automatically scan to the next higher station, play that station for a few seconds, then scan to the next higher station. Will animate a 3-D rotating disc while the CD is playing. Note: if CD play time is not shown, press clock set button (9) once.To remove CD: open the front panel and press the CD eject button located under the front panel. Remove CD from drive and close front panel. Under the front panel.Fogged CDs and Lens This condition may occur when it’s cold.

Wipe fogged CDs with a soft cloth. Fogged optical components inside the unit will return to normal operation after an hour in a heated environment. Optional Wireless Remote Control (Purchased Separately) To ensure maximum life of the optional wireless stereo remote.Audio Maximum power output (45 watts x 4 channel).180 W Continuous power, 20-20 kHz, 4 ohms, 1% THD.18 x 4 Bass boost/cut. Programmed skimming/heating cycle is running (unless in summer logic; see note below).Note: this mode consumes less energy than the standard mode outlined above. 9.3 Selecting Standard or Economy Skimming/Heating Mode Press the MODE button to select either “Standard” or “Economy” skim- ming/heating mode.

10.0 Programming Instructions 10.1 Adjusting Time of Day The Sentry control system remembers the time of day even in the event of a prolonged power outage. However, it may occasionally be necessary to reset the time of day. For example: if you are not in the Pacific Time Zone you will want to reset the time for your own time zone.

(4) Press DISPLAY to make the skimming/heating cycle programming char- acters disappear from the screen and the main display return to showing the water temperature.If no sensor is pressed within 30 seconds, the screen auto- matically returns to the standard water temperature display. At any time, you may check the programming of any aspect of any skim- ming/heating cycle by first pressing CYCLE then moving through the menu by pressing either CYCLE or SELECT. Times to enter the circulation pump programming mode.The LCD screen will display ADJUST Circ. At this time the system is ready to accept your changes. Press the SELECT sensor once. The previously programmed start time appears on the LCD display. To Unlock The Panel: Press DISPLAY, MODE, and DOWN, in order, within five seconds.The “lock” symbol will disappear.

All sensor pads LOCKED are now active.10.7 Temperature Setting Lock To electronically lock the temperature setting, first enter the “temperature setting”. ALWAYS TURN POWER TO THE HOT TUB OFF BEFORE CLEANING THE FILTER CARTRIDGE! To accomplish this, refer to the filter cleaning/ replacement procedure below: TURN POWER TO HOT TUB OFF! Filter DO NOT Reuse!Stage 1 Stage 2 filter filter (Reuseable) 1. Sundance dealer. Note: Nylon suction filters need to be cleaned periodically for optimum performance of all jets (See Figure-F, page 1 7).

1 1.2 Draining and Refilling About every 3 to 6 months, you will want to replace the hot tub’s water. The frequency depends on a number of variables including the frequency of use, number of users, attention paid to water quality maintenance, etc.

1 1.3 Mini Intelli-Jet Cleaning Procedure If you experience a sticky rotational Mini Intelli-Jet, perform the following cleaning procedure.In most of these cases debris is present in the jet bear- ings and must be cleared to achieve proper operation. Note: This procedure is considered normal maintenance for this type of jet. 1 1.4 Cleaning The Hot Tub Interior To preserve the sheen of your hot tub's surface, it is crucial that you avoid using abrasive cleaners or cleaners which have adverse chemical effect on the surface.

If you are not certain as to the suitability of a particular cleanser, consult your authorized Sundance Dealer. 1 1.7 Maintaining The Optional Synthetic Cabinet The optional synthetic cabinet requires little or no maintenance of any kind. To clean, simply wipe cabinet with a clean towel and mild detergent soap solution.CAUTION: Never spray cabinet with a garden hose for any reason since this action may induce an electrical short in the spa’s electrical equipment. Remove any remaining water from the footwell.

Turn the power to the hot tub back on briefly and press the AIR button to activate the air blower. This will evacuate the water from the air injector lines. (Note: Stand back to avoid the misty spray.) 5.

CAUTION: Never store hot tub chemicals inside the hot tub's equipment bay.12.1 pH Control pH is a measure of relative acidity or alkalinity of water and is measured on a scale of 0 to 14. The midpoint of 7 is said to be neutral, above which is alkaline and below which is acidic. 12.4 Optional SunZone Water Maintenance System If you have elected to have your hot tub equipped with the optional Sundance SunZone UV or SunZone CD water purification system you will find that your water stays fresh and clear with significantly less chemical sanitizer usage. If the hot tub water is more than 20 °F cooler than the temperature setpoint, the low speed pump #1 and heater will automatically activate to provide freeze protection. The hot tub will stay in this mode until the water temperature reaches 15 degrees below the set temperature.Communication between the control panel and/or remote control panel and circuit board is faulty. Contact your dealer or service organization. 'WATCHDOG' (Hot tub is deactivated) A problem has been detected which could cause damage to the hot tub or its components.

Del Sol Hot Tub Owners Manual Pdf

Contact your dealer or service organization. (continued on next page). (Note: This method must be used for the single speed pump (pump #2) of all Altamar, Cameo, Marin, and Optima models because pump #2 is not connected to the filter.) IMPORTANT: If freezing conditions exist and pump is not operational, take measures to protect the system from freeze damage. Check for dirty filters on all three pump 2 footwell suction covers (page 1 7).WATER IS TOO HOT.

Reduce thermostat setting (page 14). Reduce skimming/heating cycle length. Even with heater off, water temperature can increase from prolonged pump operation (page 32). 15.0 Electrical Wiring Diagram (60 Hz) (Cameo, Optima, Altamar, Marin and Capri) Page 48.16.0 Typical Spa Wiring Diagrams A-B 2-Pole Circuit Breaker with 2-Wire Grounded Load Connection (3 Wires to Hot Tub, 2-Hot (L1-L2), 1-Ground) 240 VAC White (N) Black (L1) 2-Pole GFCI Red (L2) Breaker Red (L2) Main Black (L1) Service Panel with Ground/Bonding Lug. Sundance Spas, Inc. 14525 Monte Vista Ave, Chino, CA 91710/U.S.A., Phone: (909) 606-7733, Fax: (909) 606-0195 Website: 6530-389, Rev.

Del Sol Redondo Hot Tub Owners Manual

C © 2004 Sundance Spas, Inc. Printed in U.S.A.

Posted on Post navigation.

Hello there guys and sorry for this being my first post but i need some help before the misses goes even madder at not being able to use the hot tubWe acquired a friends Del Sol Redondo hot tub about 3/4 years when they moved off to Spain. It has been working great up until last year when the control panel no longer functioned properly (some times it would start, not getting the temp up correctly, bubbles not coming on properly). After a lot of looking around for the part (very hard to find about this tub in the UK), we managed to get the part and I installed it last month with no probs. Started it up with out the filter in and all was good.

Del Sol Hot Tub Owners Manual Free

Let it run for a bit and temp was going up nicely and all looked good.Put the filter back into it and placed the cover back over to get nice and warm. Cam back a little later and was getting up to temp nicely. A little later, found out that it had stopped pumping and a FLO error had come up. Turned it all off and made sure the filter was in correct, which it was. Nothing had gotten into the pipes to stop the flow either. Turned it all back on only to find 3 dashes on the display now and it will not start pumping.Ive made sure there is not an airlock in the pipes but apart from that im at a loss. I can not find any manuals online for it to help me out.Was wondering if it needs a re set some how but i do not know how to do that eben.Any advice or help would be wonderful.Thx a lot guysJoe.